Orador Anton
40000,00 €
Orador Anton
Me complace anunciar un gran avance en la reproducción musical de la mano de Daniel Hertz. Por primera vez, disponemos de un altavoz de altísimas prestaciones con la combinación mágica de cualidades a un precio al alcance de más gente, en un tamaño elegante que encaja en cualquier habitación.
Especificaciones
Impedancia:
8 Ω
Respuesta en frecuencia:
25 Hz - 20 kHz
Eficiencia:
99,5 dB/1W/1M
Impedancia:
800 W (potencia musical)
Dimensiones:
Altura: 127 cm (50″)
Anchura: 47 cm (18,5″)
Profundidad: 43,5 mm (17″)
Peso: 75kg (165 lb)
Visión general
El controlador del altavoz es el motor
Daniel Hertz is an engineering company dedicated to maximum performance and minimalist design. Reproducing music without compromise is like building an F1 car – the foundation is the math. Anton uses a high-performance 15” coaxial driver with specifications and performance beyond any other speaker available (short of the DH M1 Delta, which costs ten times more).
This driver moves more air faster and cleaner, providing astonishing acceleration, efficiency, power handling, deep bass extension, and pinpoint imaging. The DH in-house designed crossover achieves linear response across the entire audio band. The cabinet features carefully engineered dimensions, high-mass wood with internal bracing, and precise tuning.
Like a 1200-HP V12 motor, Anton’s 15” coaxial driver delivers performance you can’t get any other way.
Acabado titanio
Anton comes with a new Italian dark-grey titanium finish. This surface is modern and fresh—matte rather than glossy—but still full of life like real metal. The dark-grey tone complements most interiors.
Anton’s titanium finish and overall appearance reflect the no-nonsense purpose of this speaker: to deliver maximum performance with natural sound, wide dynamic range, and deep bass in a minimalist, elegant design.
Designer options, including wood sides and other colors, are available at additional cost.
Power Requirements
Fifty watts of power through Anton produce an SPL of 118 dB—output that would require 800 W with a typical speaker rated at 87 dB efficiency. (changed “is produced by” → “produce”) Even if an amplifier could output 800 W, most high-end speakers could not handle it.
Not all music demands such dynamic range; however, true no-compromise reproduction across all genres requires it. As a result, Anton sets you free with unprecedented dynamic-range capability.
High Efficiency Means You Hear More
As a professional musician and acclaimed recording and mastering engineer, Mark Levinson has spent fifty years advancing music reproduction. With Anton, he brings high-performance sound within reach of more people.
There are two things you can do with electrical energy: turn it into sound or heat. The lower the efficiency of a speaker, the more of the recording becomes heat and disappears. Thanks to an efficiency of 99.5 dB, Anton lets you hear more of the recording than most high-end speakers.
Beware of efficiency ratings that claim 90 dB or higher—many are measured at 4 Ω, not 8 Ω. Subtract 3 dB to compare fairly. Typical speakers range between 82–89 dB.
Made in Italy
Every part of Anton is handcrafted in Italy — from the 15″ coaxial driver and cabinet to the crossover, rear panel, and speaker connectors.
Small family-owned companies in the region specialize in low-volume, high-quality production. The Daniel Hertz team in Venice (Marghera) takes pride in their work and builds each product as if it were for their own use.
Some of the finest string instruments in history were crafted here in the 17th and 18th centuries by great masters. Many survive today and continue to be played by musicians who treasure them. Mark Levinson chose this region to build Daniel Hertz products, inspired by those artisans who built to a standard—not a price.
Satisfacción a largo plazo y orgullo de pertenencia
Diseñado personalmente por Mark Levinson, Anton está construido para proporcionar satisfacción a largo plazo a más de una generación de amantes de la música. Materiales de la más alta calidad, las especificaciones más exigentes, piezas de ingeniería de precisión, artesanía, atención al detalle y un precio razonable hacen de Anton un altavoz muy deseable para el amante de la música más exigente.
La historia de Anton
What Is Anton?
Anton is a game-changing speaker. Like Daniel Hertz C-Wave, Mighty Cat, and the Maria amplifier, it raises the bar for music reproduction.
Anton offers a combination of qualities never available before in one design:
High efficiency of 99.5 dB
Powerful deep bass from a 15″ pro-audio subwoofer (–3 dB @ 27 Hz in a normal room)
118 dB SPL (stereo) with a Maria 350 amplifier, 30 Hz–20 kHz
Point-source imaging from a pro-audio coaxial studio monitor
Smooth, extended response to 20 kHz
Midrange transparency comparable to electrostatics
Works with a two-channel amplifier (no bi-amping required)
Front port for wall-friendly placement
Pricing similar to many low-efficiency speakers
What Makes This Possible?
Anton is built around a new high-performance 15″ coaxial driver.
The DH-designed cabinet provides the internal volume, bracing, and porting to unleash its full potential.
The Mighty Cat software suite in DH electronics includes unique speaker-tuning tools. Through fully programmable signal flow and layered EQ, engineers achieve extremely smooth response with no coloration—something passive crossovers or typical active filters cannot do.
Anton’s 99.5 dB efficiency ensures more electrical energy becomes sound rather than heat.
Amplifier Compatibility
María 350
The Maria 350 provides the transparency, speed, power, and regulated supplies—plus C-Wave and speaker tuning—to let Anton perform at its best.
Daniel Hertz also offers a small, low-cost tuning interface that fits between a preamplifier and power amplifier (or DAC and amp). This box lets Anton integrate with almost any music system. Customers may later trade it in toward a Maria amplifier.
Versions
Anton features a new Italian dark-grey titanium finish with optional wood-veneer sides at extra cost. Pricing depends on the selected veneer.
Speaker Connectors
Anton uses Daniel Hertz’s in-house-made speaker connectors for maximum performance and reliability. These connectors have virtually no voltage or current limits.
Daniel Hertz designs them to ensure the best possible signal transmission. Bare-wire connection eliminates eight solder joints and additional metal parts in a stereo system. Spade lugs are accepted; banana plugs are excluded due to their current limits.
A Delrin® cap presses two machined brass plates together, sandwiching the wire with firm pressure. A Daniel Hertz tightening tool is included to ensure the correct clamping force.
Maria 350: el amplificador ideal para conducir a Anton
The Daniel Hertz Anton Speaker works beautifully with almost any quality amplifier. Its 8-ohm impedance and 99.5 dB efficiency let even low-power tube amplifiers—as little as 1 W—drive it easily.
However, the Maria 350 remains the ideal match. Its pure sonic character, speed, fine detail, tight punch, and wide dynamic range reveal everything Anton can deliver. In addition, the amplifier’s regulated power supplies, inaudible noise floor, and exclusive embedded C-Wave™ and speaker-tuning technology create the most natural sound stage possible.
Designing a 15-inch coaxial speaker is always a challenge because of physical and acoustic limits. Maria 350 overcomes these limits. Its integrated tuning software allows engineers to fine-adjust frequency and phase response, achieving an exceptionally smooth, linear sound while preserving all the benefits of large-format coaxial performance.
English (UK) 
Polski 
Español 
